Add accessories for eBee!

After added eBee to the e-wallpaper, now I want to add some accessories on eBee.

1.    I open another new page by click File --> New, then set the Preset to International Paper. 

2.    Click File --> Open to open a picture from my folder.

3.    Use Quick Selection Tool to select the mortar board in the picture.

4.    Picture below show the mortar board after selected is surrounded by dotted line. Press Ctrl + C to cut the picture.  

5.    Go to the e-wallpaper page, press Ctrl + V to paste the mortar board.

6.    Back to the page I opened just now, Click Select --> Deselect to remove the dotted line. 

7.    Same as step 3 and 4, after use Magic selection Tool to select the certificate then press Ctrl + C to cut.

8.    Press Ctrl + V to paste the certificate at the e-wallpaper page.

9.    After paste all the pictures to e-wallpaper page, now start to do the adjustment. First, adjust the scale of the eBee. Click Edit --> Transform --> Scale. Use Move tool to move the mortar broad to eBee's head.

10.    Same step used to adjust the scale of the mortar broad and move it.

11.    Due to the mortar broad's angle does not suit the eBee, so click Edit --> Transform --> Flip Horizontal.

12.    Click Edit --> Transform --> Rotate, to adjust the mortar broad until it suit on eBee's head.

Picture after the eBee is wearing the mortar board!

13.    Same way to adjust the scale, rotate and move the certificate.

Done! 

I realize the background is too bright after put in the eBee, because some of the part of eBee cannot see clearly. So, I decide to delete the layer of level adjustment by drag the layer to the recycle bin icon at the bottom of the right hand side.

Done! =)